Big-T
Veteran Starter w/Big Long Term Deal
- Joined
- Aug 27, 2009
- Messages
- 7,902
- Reaction score
- 3,695
http://www.hawkridgesys.com/blog/si...5-tom-bradys-case-solidworks-flow-simulation/
Findings by what appears to be a Seahawks fan who ran the sim:
Just from going from inside to outside resulted in a drop of 1.05 PSI
Adding in friction from the rubbing process (the part Belichick said added 1 PSI) increased the internal temperature of the ball after just 4 and a half minutes to 85 Fahrenheit and a new PSI of 13.1.
With the frictioned up Footballs, the PSI drop once the ball is taken outside is 1.55 PSI to 10.95.
Findings by what appears to be a Seahawks fan who ran the sim:
Just from going from inside to outside resulted in a drop of 1.05 PSI
Adding in friction from the rubbing process (the part Belichick said added 1 PSI) increased the internal temperature of the ball after just 4 and a half minutes to 85 Fahrenheit and a new PSI of 13.1.
With the frictioned up Footballs, the PSI drop once the ball is taken outside is 1.55 PSI to 10.95.
Last edited: